Toshiba e-STUDIO2500c Copier User Manual


 
Notice to Users 1
Notice to Users
USE OF RECYCLED PAPER IN THE COPIER
As with all copiers and reproduction devices, the use of the appropriate paper ensures the best image
quality of the copies and the machine’s performance and reliability.
Because of the extreme variances in composition and quality of paper from various manufacturers, con-
sumers should ensure the recycled paper they use is suitable for the copier. In accordance with the EPA
Energy Star Program guidelines, TOSHIBA recommends the following recycled paper for use in the
copier-
Great White MultiUse 20 paper
If you have any questions regarding the use of recycled paper in your copier, contact your authorized
service technician.
FCC NOTICE
This equipment has been tested and found to comply with the limits for a Class A digital device, pursu-
ant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a commercial environment. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in accordance
with the instruction manual, may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in which case the user will be
required to correct the interference at his own expense.
WARNING
Changes or modification made to this equipment, not expressly approved by TOSHIBA TEC or parties
authorized by TOSHIBA TEC, could void the user’s authority to operate the equipment.
This Class A digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada.
User Safety
This TOSHIBA multifunctional digital color systems does not produce laser radiation hazardous to the
user. It is certified as a Class 1 laser product under the U.S Department of Health and Human Services
(DHHS) Radiation Performance Standard according to the Radiation Control Health and Safety Act of
1968.
Protective housing and external covers completely confine the laser beam light emitted inside the multi-
functional digital color systems. The laser beam cannot escape from the machine during any phase of
user operation.
Regulations implemented on August 2, 1976 by the Bureau of Radiological Health (BRH) of the U.S
Food and Drug Administration apply to laser products manufactured from August 1,1976. Laser prod-
ucts marketed in the United States must comply with these regulations.
CAUTION
Using controls or adjustments or performing procedures, other than those specified herein may result in
hazardous radiation exposure.
The unit is classified as Class 1 Laser Product according to IEC 60825-1:1993/EN 60825-1.1994
including amendments.
The unit uses laser diode of output 25 mW, wave length 790 nm, continuous pulse.