Filter
Top Products
1 BEFORE USING EQUIPMENT
50 Preparation 1- Turning Power On/Off
These modes are automatically cleared upon the reception of print data, Fax data, Internet Fax
data or E-mails. They are also cleared by pressing the [START] button.
*1 This period is set at 15 minutes by factory default.
*2 This period is set at 60 minutes for the e-STUDIO2500c/3500c and 90 minutes for the e-STUDIO3510c
by factory default.
See the User Functions Guide to change the default settings noted above.
The equipment can also be made to enter the sleep mode manually by means of the following
procedure.
2
Press the [SLEEP] button on the touch panel.
The equipment enters into the sleep mode. During this mode, the display on the touch
panel disappears and the [ENERGY SAVER/SHUTDOWN] button lights in green.
To cancel the energy saving mode
Press the [START] button on the control panel. The sleep mode is cleared and the equipment
will be ready for copying.
The sleep mode is also cleared by pressing any button of [ENERGY SAVER / SHUTDOWN],
[COPY], [SCAN], [FAX] and [e-FILING].
1
Press the [ENERGY SAVER/
SHUTDOWN] button on the
control panel.