Filter
Top Products
- 151 -
Notes (1) The print origin of coordinates must be set so that the result of drawing the graphic
data will be within the effective print area set by the Label Size Set Command
([ESC] D).
(2) The number of graphic width dots and the number of graphic height dots must also
be set so that the result of drawing the graphic data will be within the effective print
area set by the Label Size Set Command ([ESC] D) in the same manner as the
above.
(3) Both width and height are 8 dots/mm.
(4) The actual result of drawing may deviate within ±0.33 mm in the X direction with
respect to the designated print origin of the X-coordinate.
To draw the received graphic data at high speed, the data is directly
developed in the image buffer without applying correction to each bit with
respect to the designated X-coordinate. Consequently, an error of up to 4
bits occurs.
[Effective print area] [mm]
Model B-SV4D
Item Method Batch Strip Cutter
Effective print width Min. 13.0
Max. 108 ± 0.2
Effective
print length Min. 8.0 23.4 13.0
Label
Max. 607.6
Min. 8.0
Tag – 13.0
Max. 607.6 – 607.6