Toshiba GC10-QM Barcode Reader User Manual


 
- 64 -
e: Type of check digit
1: Without attaching check digit
2: Check digit check
WPC Modulus 10
CODE93 Modulus 47
CODE128 PSEUDO 103
3: Check digit auto attachment (1)
WPC Modulus 10
CODE93 Modulus 47
CODE128 PSEUDO 103
UCC/EAN128 Modulus 10 + Modulus 103
Customer code Special check digit
POSTNET Special check digit
RM4SCC Special check digit
4: Check digit auto attachment (2)
WPC Modulus 10 + Price C/D 4 digits
5: Check digit auto attachment (3)
WPC Modulus 10 + Price C/D 5 digits
* For the Customer bar code, POSTNET, and RMC4SCC, only “3:
Check digit auto attachment (1)” is effective.
ff: 1-module width
01 to 15 (in dots)
k: Rotational angle of bar code
0: 0°
1: 90°
2: 180°
3: 270°
llll: Height of the bar code
0001 to 1000 (in 0.1 mm units)
For the Customer bar code, POSTNET, RMC4SCC, KIX CODE, the height of
the long bar is specified.
mnnnnnnnnnn: Increment/decrement
(Omissible. If omitted, incrementing/decrementing is not performed.)
m: Indicates whether to increment or decrement
+: Increment
-: Decrement
nnnnnnnnnn: Skip value
0000000000 to 9999999999
ooo: Length of WPC guard bar
(Omissible. If omitted, the guard bar is not attached.)
000 to 100 (in 0.1 mm units)
p: Selection of print or non-print of numerals under bars
(Omissible. If omitted, the numerals under the bars are not printed.)
0: Non-print
1: Print