Toshiba GC10-QM Barcode Reader User Manual


 
- 49 -
6.3.8 OUTLINE FONT FORMAT COMMAND [ESC] PV
Function Sets the format to indicate the position on the label, at which the outline font is to be
printed and how it is to be printed.
Fonts other than TrueType font
Format [ESC] PVaa; bbbb, cccc, dddd, eeee, f (, ghhh), ii, j (, Mk) (, lmmmmmmmmmm)
(, Znn) (, Po) (=ppp------ppp) [LF] [NUL]
[ESC] PVaa; bbbb, cccc, dddd, eeee, f (, ghhh), ii, j (, Mk) (, lmmmmmmmmmm)
(, Znn) (, Po) (; qq
1
, qq
2
, qq
3
, ------, qq
20
) [LF] [NUL]
Term aa: Character string number
00 to 99
bbbb: Print origin of X-coordinate of the character string
Fixed as 4 digits (in 0.1 mm units)
cccc: Print origin of Y-coordinate of the character string
4 or 5 digits (in 0.1 mm units)
dddd: Character width
0020 to 0850 (in 0.1 mm units)
eeee: Height of the character
0020 to 0850 (in 0.1 mm units)
f: Type of font
A: TEC FONT1 (Helvetica [bold])
B: TEC FONT1 (Helvetica [bold] proportional)
ghhh: Fine adjustment of character-to-character space
(Omissible. If omitted, space is adjusted according to the designated font.)
g: Designates whether to increase or decrease the character-to-character
space.
+: Increase
-: Decrease
hhh: No. of space dots between characters
000 to 512 (in dots)
ii: Rotational angles of a character and character string
00: 0° (char.) 0° (char.-string)
11: 90° (char.) 90° (char.-string)
22: 180° (char.) 180° (char.-string)
33: 270° (char.) 270° (char.-string)