Toshiba GC10-QM Barcode Reader User Manual


 
- 176 -
8.3 ERRORS IN WRITABLE CHARACTER AND PC COMMAND SAVE MODES
(1) Write Error
• An error has occurred in writing in the flash memory board.
(2) Format Error
• An erase error has occurred in formatting the flash memory board.
(3) Memory Full
• Storing is impossible because of the insufficient flash memory capacity.
* At the moment when an error occurs, the printer shows the error message, makes status
response, then stops. The Status Request Command and Reset Command only can be
processed and other commands are not processed. Restoration using the [FEED] key is
impossible.