Toshiba GC10-QM Barcode Reader User Manual


 
- 50 -
j: Character attribution
B: Black character
W (aabb): Reverse character
aa: No. of dots from the character string to the end of the black
background in the horizontal direction.
bb: No. of dots from the character string to the end of the black
background in the vertical direction.
aa: 01 to 99 (in units of dots)
bb: 01 to 99 (in units of dots)
F (aabb): Boxed character
aa: No. of dots from the character string area to the box in the
horizontal direction.
bb: No. of dots from the character string area to the box in the vertical
direction.
aa: 01 to 99 (in units of dots)
bb: 01 to 99 (in units of dots)
C (aa): Stroked out character
aa: No. of dots from the character string area to the end of the stroke
aa: 01 to 99 (in units of dots)
* Descriptions in parentheses are omissible.
(If omitted, it is character size (the larger character width or height) ÷ 8 dots.)
Mk: Type of the check digit to be attached
(Omissible. If omitted, the check digit is not drawn.)
k: Type of check digit
0: Modulus 10 (Draws data and check digit)
1: Modulus 43 (Draws data and check digit)
2: DBP Modulus 10 (Draws check digit only)
lmmmmmmmmmm: Increment and decrement
(Omissible. If omitted, incrementing/decrementing is not
performed.)
l: Designates whether to increment or decrement.
+: Increment
-: Decrement
mmmmmmmmmm: Skip value
0000000000 to 9999999999
Znn: Zero suppression
(Omissible. If omitted, the zero suppression process is not performed.)
nn: No. of zeros to be suppressed
00 to 20