Toshiba GC10-QM Barcode Reader User Manual


 
- 175 -
(2) Cutter Error
Cutter
When the cutter does not move from the cutter home position 50 msec or more after the cutter
solenoid is driven, an error will result.
The cutter moves from the home position, however, it does not return to the home position after
500 msec.
(3) Label End
When the transmissive sensor and reflective sensor detect the label end state in 10 mm
continuously, an error will result.
If the transmissive sensor and reflective sensor detect the label end state when an issue, feed
and ejection is attempted in a printer stop state, an error will result.
(4) Head Open Error
If the head open sensor detects the open state when an issue, feed and ejection is attempted in
a printer stop state, an error will result.
(5) Thermal Head Excessive Temperature
When the thermal head temperature detection thermistor detects an excessively high
temperature, an error will result.