Filter
Top Products
3 Tests and Diagnostics 3.27 LAN/Modem/Bluetooth/IEEE1394 Test Program
3-74 [CONFIDENTIAL] TECRA M5 Maintenance Manual (960-542)
Error code
Table 3-7 Error code for Bluetooth test (BD_ADDR of the DUT) (1/2)
Error code Meaning
0x01 Unknown HCI Command
0x02 No Connection
0x03 Hardware Failure
0x04 Page Timeout
0x05 Authentication Failure
0x06 Key Missing
0x07 Memory Full
0x08 Connection Timeout
0x09 Max Number Of Connections
0x0a Max Number Of SCO Connections To A Device
0x0b ACL Connection already exists
0x0c Command Disallowed
0x0d Host Rejected due to limited resources
0x0e Host Rejected due to security reasons
0x0f Host Rejected due to remote device is only a personal device
0x10 Host Timeout
0x11 Unsupported Feature or Parameter Value
0x12 Invalid HCI Command Parameters
0x13 Other End Terminated Connection: Used Ended Connection
0x14 Other End Terminated Connection: Low Resources
0x15 Other End Terminated Connection: About to Power Off
0x16 Connection Terminated by Local Host
0x17 Repeated Attempts
0x18 Paring Not Allowed
0x19 Unknown LMP PDU
0x1a Unsupported Remote Feature
0x1b SCO Offset Rejected
0x1c SCO Interval Rejected
0x1d SCO Air Mode Rejected
0x1e Invalid LMP Parameters
0x1f Unspecified Error
** See the Specification of the Bluetooth System in detail.