4.3 Express card/PC card 4 Replacement Procedures
5. Press the eject button for the PC card you want to remove to extend the button.
6. Press the extended eject button to pop the PC card out.
7. Grasp the PC card and pull it out.
Eject button
PC card
Figure 4-3 Removing the PC card
Installing the Express card/PC card
To install the Express card/PC card, follow the steps below and refer to Figure 4-2 and 4-3.
CAUTION: The upper slot is for only an Express card and the lower slot is for only a PC
card. Do not insert a PC card in the upper slot.
1. Insert the PC card/Express card into the card slot.
2. Push it carefully to ensure a firm connection.
TECRA M5 Maintenance Manual (960-542) [CONFIDENTIAL] 4-11