Filter
Top Products
3.29 SETUP 3 Tests and Diagnostics
TECRA M5 Maintenance Manual (960-542) [CONFIDENTIAL] 3-99
(c) Parallel Port Mode
The options in this tab are ECP and Standard Bi-directional.
ECP Sets the port mode to Extended Capabilities Port (ECP). For
most printers, the port should be set to ECP. (Default)
Std. Bi-Direct.
This setting should be used with some other parallel devices.
15. Legacy Emulation.
(a) USB KB/Mouse Legacy Emulation.
Use this option to enable or disable USB KB/Mouse Legacy Emulation. If
your operating system does not support USB, you can still use a USB mouse
and keyboard by setting the USB KB/Mouse Legacy Emulation item to
Enabled.
Enabled USB Legacy Support can be used. (Default)
Disabled USB Legacy Support cannot be used.
(b) USB-FDD Legacy Emulation.
Use this option to enable or disable USB-FDD Legacy Emulation.
Enabled USB Legacy Support can be used. (Default)
Disabled USB Legacy Support cannot be used.
(c) USB Memory BIOS Support Type
Sets the type of the USB memory as a startup device.
HDD Set the type of the USB memory to be equivalent to the HDD
(Default).
Based on the [HDD] order in the [Boot Priority Options] item.
The order with respect to the other HDD can be set in the
[HDD Priority Options] item.
FDD Set the type of the USB memory to be equivalent to the FDD.
Based on the [FDD] order in the [Boot Priority Options] item.