Toshiba M5 Laptop User Manual


 
Appendix G BIOS rewrite procedures Appendices
Appendix G
Appendix G BIOS rewrite procedures
This Appendix explains how to rewrite the system BIOS program when you update the
system BIOS.
Tools
To rewrite the BIOS, you need the following tool:
BIOS/EC/KBC rewriting disk for the computer that has renewed BIOS data.
Rewriting the BIOS
1. Set the system to boot mode.
2. Turn off the power to the computer.
3. Remove the external cable and PC card.
4. Connect an USB FDD and insert the BIOS/EC/KBC rewriting disk into the USB
FDD.
5. Turn on the power while holding down the tilde character key until a beep sounds.
For example
(US Keyboard)
(UK Keyboard)
6. The BIOS rewriting starts
7. When the process is completed, it beeps and the system automatically reboots.
NOTE:
1. Connect the AC adapter to the computer when you rewrite the BIOS.
2. Do not turn off the power while you are rewriting the BIOS. If the rewrite
fails, it might be impossible to start up the computer.
3 If you fail to rewrite BIOS, then when you next turn on the power, a message
may be displayed that the contents of the BIOS have been erased. In this
case, insert the BIOS rewriting disk and the BIOS will be rewritten.
TECRA M5 Maintenance Manual (960-542) [CONFIDENTIAL] G-1