Filter
Top Products
86
Scheduled Screen Overview
The Scheduled Backup Screen is used for performing bulk backup of video recorded by all cameras on a regular scheduled basis (1-24
hours). The Scheduled Backup Screen is similar to the General Backup Screen.
Performing a Scheduled Backup
1. Click Backup on the Display screen.
2. Click the Schedule tab at the top of the Backup Center window.
3. Select the blocks of time to back up using the Hour/Minute Grid. Blocks of time with recorded video are highlighted in green.
Blocks of time selected for backup are highlighted in red.
4. Set the Backup Time to perform the backup.
5. Set the Repeat Backup(Daily) time to specify the number of hours between backup procedures (between 1 and 24 hours).
6. Select the Backup Drive to save the backup video under Select Backup Media or click Network Drive. To save to a local
drive or partition you must first rename the location “BACKUP”.
7. Select Overwrite on Disk Full to overwrite previous backup files when the disk becomes full.
8. Click Save Backup Setting to save the current backup setting and return to the Display screen.
Specifying Scheduled Backup Drives
In order to use the Scheduled Backup feature one or more storage drives or partitions connected to the recorder must be specified as a
backup drive.
1. From the Display screen, click Exit and choose Restart in Windows Mode.
2. Double-click My Computer.
3. Right-click on the drive to specify as a backup drive
for Scheduled Backup and click Rename. Rename
the drive to ‘Backup’. Repeat this process for all
drives to use for Scheduled Backup. To remove a
drive from use for Scheduled Backup, change its
name to something other than ‘Backup’.
4. Restart Surveillix and return to the Schedule tab in
the Backup Center window.
Note The C: Drive CANNOT be used as a backup location;
this is done intentionally to protect the operating system.