Filter
Top Products
4.4 Expansion Memory module 4 Replacement Procedures
PORTEGE R200 Maintenance Manual (960-519) [CONFIDENTIAL] 4-13
Installing the Expansion memory module
To install the expansion memory module, follow the steps below and refer to Figure 4-4.
CAUTION: The power must be turned off when you insert the memory module. Inserting
a memory module with the power on risks damaging the module or the
computer itself.
Never press hard or bend the memory module.
1. Insert the memory module into the connector on the system board slantwise and
press it to connect firmly.
CAUTION: After installing the memory module, confirm that the memory module is fixed
with the left and right latches.
2. Install the memory slot cover and secure it with the screw (with e-ring).
3. When the power of the computer is turned on, the computer checks automatically the
memory size. Confirm that the new memory is detected correctly.
4. If the memory is not detected, check that it is connected correctly.