Filter
Top Products
4 Replacement Procedures 4.9 Cover assembly/Battery latch assembly
4.9 Cover assembly/Battery latch assembly
Removing the Cover assembly/Battery latch assembly
To remove the cover assembly/battery latch assembly, follow the steps below and refer to
Figure 4-13 to 4-15.
1. Turn over the computer and remove the following screws.
• M2×4S BIND screw x13 (“4” in the figure below)
• M2×3S S-FLAT HEAD screw x1 (“3” in the figure below)
4
4
4
4
4
4
4
4
4
4
4
4
4
3
Figure 4-13 Removing the cover assembly(1)
4-24 [CONFIDENTIAL] PORTEGE R200 Maintenance Manual (960-519)