Filter
Top Products
4.6 Keyboard 4 Replacement Procedures
4.6 Keyboard
Removing the keyboard
To remove the keyboard, follow the steps below and refer to Figure 4-8 and 4-9.
CAUTION: As the keytop may fall out, when handling the keyboard always hold it by the
frame and do not touch the keytop.
1. Remove the following screw.
• M2×4S BIND screw x1
2. Turn over the computer and open the display.
3. Insert your nails in the slot of the right topside and left topside of the keyboard
holder and lift it up to remove.
4. Remove the following screws fixing the keyboard.
• M2×2.5C S-FLAT HEAD screw x2
5. Lift the upper side of the keyboard and turn it face down on the palm rest.
M2×2.5C S-FLAT HEAD
M2×2.5C S-FLAT HEAD
M2×4S BIND
Keyboard holder
Keyboard
Figure 4-8 Removing the keyboard holder
PORTEGE R200 Maintenance Manual (960-519) [CONFIDENTIAL] 4-17