Filter
Top Products
4.24 FL inverter/LCD unit 4 Replacement Procedures
PORTEGE R200 Maintenance Manual (960-519) [CONFIDENTIAL] 4-47
Installing the FL inverter/LCD unit
To install the FL inverter/LCD unit, follow the steps below and refer to Figure 4-31 and 4-32.
1. Set the LCD unit to the display cover in place.
2. Connect the LCD cable to the LCD unit and stick the glass tape on the LCD cable.
3. Connect the two cables to the both sides of the connector on the FL inverter and
install the FL inverter according to the guide.
4. Secure the FL inverter with the following screw and stick the insulator.
• M2×3C S-FLAT HEAD screw x1