Filter
Top Products
2.8 Display Troubleshooting 2 Troubleshooting
PORTEGE R200 Maintenance Manual (960-519) [CONFIDENTIAL] 2-41
Procedure 4 Replacement Check
Fluorescent lamp, FL inverter, LCD module, HV cable, FL cable and LCD cable are
connected to display circuits. Any of these components may be faulty. Refer to Chapter 4,
Replacement Procedures, for instructions on how to disassemble the computer and then
perform the following checks:
• If fluorescent lamp does not light, perform Check 1.
• If characters or graphics on the internal display are not displayed clearly, perform Check
4.
• If some screen functions do not operate properly, perform Check 4.
• If fluorescent lamp remains lit when the display is closed, perform Check 5.
Check 1 Replace fluorescent lamp with a new one following the instructions in Chapter 4,
Replacement Procedures and test the display again. If the problem still occurs,
perform Check 2.
Check 2 HV cable, FL cable or LCD cable may be faulty. Replace the faulty cable with a
new one following the instructions in Chapter 4, Replacement Procedure and test
the display again. If the problem still occurs, perform Check 3.
Check 3 FL inverter may be faulty. Replace FL inverter with a new one following the
instructions in Chapter 4, Replacement Procedure and test the display again. If the
problem still occurs, perform Check 4.
Check 4 LCD module may be faulty. Replace LCD module with a new one following the
instructions in Chapter 4, Replacement Procedure and test the display again. If
the problem still occurs, perform Check 5.
Check 5 System board may be faulty. Replace it with a new one following the instructions
in Chapter 4, Replacement Procedure.