Filter
Top Products
4 Replacement Procedures 4.27 Fluorescent Lamp
2. Removing screws
1) Spread out the insulation sheet without detaching from the bezel side, as shown in
the figure below.
2) Remove the left side screw and right side screw as shown in the figure below.
CAUTION: Use a Philips screwdriver with type 0 bit to remove the screws.
Pr
oduct
i
o
n l
abe
l
Figure 4-39 Replacing TMD fluorescent lamp(2)
4-56 [CONFIDENTIAL] PORTEGE R200 Maintenance Manual (960-519)