Filter
Top Products
4.20 Microphone harness 4 Replacement Procedures
4.20 Microphone harness
Removing the Microphone harness
To remove the microphone harness, follow the steps below and refer to Figure 4-36.
1. Disconnect the microphone harness from the connector CN6050 on the sound board.
2. Remove the microphone harness from the slot of the base assembly.
CN6050
Microphone harness
Figure 4-36 Removing the microphone harness
Installing the Microphone harness
To install the microphone harness, follow the steps below and refer to Figure 4-36.
1. Connect the microphone harness to the connector CN6050 on the sound board and
set the microphone harness into the slot of the base assembly.
TECRA A10/S10/P10/SatellitePro S300 Maintenance Manual (960-684) [CONFIDENTIAL] 4-59