Filter
Top Products
4 Replacement Procedures 4.35 Hinge
4-110 [CONFIDENTIAL] TECRA A10/S10/P10/SatellitePro S300 Maintenance Manual (960-684)
Installing the Hinge
To install the hinge, follow the steps below and refer to Figure 4-67 and 4-68.
1. Set the brake hinge R in place and secure it with the following screws.
• M2.5×6C Tapping screw ×2
2. Set the brake hinge L while engaging two hooks and secure it with the following
screw.
• M2.5×6C Tapping screw ×1