Filter
Top Products
4.30 Smart card unit 4 Replacement Procedures
4.30 Smart card unit
Removing the Smart card unit
To remove the Smart card unit, follow the steps below and refer to Figure 4-55.
1. Peel off the insulator fixing the Smart card FPC.
2. Pull the Smart card FPC from the hole 1 out, then pull the Smart card FPC from
the hole 2 out.
3. Lift up the hook of the Smart card unit in the direction as shown in the figure below
to remove the Smart card unit from the guides.
Insulator
Smart card FPC
Smart card unit
Hole1
Guide
Guide
Hook
Hole2
Figure4-55 Removing the Smart card unit
TECRA A10/S10/P10/SatellitePro S300 Maintenance Manual (960-684) [CONFIDENTIAL] 4-87