Filter
Top Products
3.26 SETUP 3 Tests and Diagnostics
Use this option to set a time and date for automatic power on and enable or
disable the ring indicator feature. Ring Indicator displays only when the
computer is in Resume mode and the Alarm Date Option displays when
Alarm Time is enabled.
OPTIONS
Alarm Time = 00:00:00
Alarm Date Option = Disabled
Ring Indicator = Disabled*
Wake-up on LAN = Disabled**
*
only for Modem Model **only for LAN Model
Alarm Time is set in the sequence of hours and minutes. Seconds cannot be
changed. Alarm Date Option is set in the sequence of month and day. If
Alarm Date is set to Disabled, the computer will be powered on at the same
time every day. Press ↓ to move the cursor to the right and ↑ to move the
cursor to the left when you set the date and time.
NOTE: 1. Do not remove the AC adaptor and battery pack at the same time when you
use this feature. If you do so, data saved by the resume function will be lost.
You must also reset this option.
2. If you have set a password and the computer boots by the Auto Power On
function and Resume is on, the computer will start with the instant security
function enabled. The password = message is not displayed; however, you
must enter the password to use the computer.
(e) Panel Power On/Off
This option lets you set the Panel Power On/Off function. It is effective only
in Resume mode.
Enabled Enables the Panel Power On/Off.
Disabled Disables the Panel Power On/Off (Default)
8. System Date/Time
Use this option to set the computer’s system date/time. Press ↓ to move the cursor to
the right and press ↑ to move the cursor to the left. Press the space bar to increase
the number and press BkSp to decrease the number.
(a) System Date
Use this option to set the system date of the computer.
(b) System Time
Use this option to set the system time of the computer.
Satellite A20 Maintenance Manual (960-444) 3-79