Toshiba satellite a20 series Personal Computer User Manual


 
4 Replacement Procedures 4.29 Wireless LAN Antenna/Bluetooth Antenna/Display Cover
Installing the Wireless LAN Antenna/Bluetooth Antenna/Display Cover
To install the wireless LAN antenna/Bluetooth antenna/display cover, follow the steps below
and refer to figures 4-42 to 4-49.
1. Install the two hinges on the hole of the display assembly and secure the hinges with
the following screws.
M2.5×6 FLAT HEAD screw ×4
2. (For wireless LAN/Bluetooth models only)
Fit the wireless LAN antennas and Bluetooth antenna to the groove on the rear of the
display cover and secure it with the three acetate tapes. Then pass the wireless LAN
cables (black and white) and Bluetooth cable (brown) through the guides on the back
of the display cover.
Blutooth antenna cable
(brown)
Wireless LAN antenna cables
(Black and white)
Figure 4-49 Installing the Wireless LAN/Bluetooth antenna cable
4-80 Satellite A20 Maintenance Manual (960-444)