Filter
Top Products
2 Troubleshooting Procedures 2.12 Sound Troubleshooting
Table 2-3 Printer port LED boot mode status (4/8)
LED Status Test item Message
Setting resume error request (03h)
System BIOS ROM to RAM copy (The system
halts when an error is detected.)
SMRAM initialization
Check of Wake Up factor
SMRAM base rewrite and BIOS CPU state map
store
04h SMRAM initialization
Enabling SMI by ASMI
Initialization of devices that needs initialization
before PCCI Bus initialization
PIT test (at Cold Boot) and initialization of PIT
Setting test pattern for PIT#0 CH0
Check whether the test pattern set can be read
PIT CH0 initialization (setting timer interrupt
internal to 55m/s)
PIT CH2 initialization (setting the frequency for
sound generator to 55 m/s)
PIT CH1 test (Check whether the refresh signal is
working properly when the refresh interval is
30m/s. The system halts when the time is out.)
PIT CH2 test (Check whether the speaker gate is
working properly.)
Measuring of CPU clock
Enabling SMI except for auto-off function
Battery discharge current control (ICmA)
Executing division proves for measuring IRT time
Setting of clock generator
Check of parameter block A
CPU initialization
Micro code update
Check of Geyserville support
Setting CPU clock to high
05h CPU initialization
Setting of Graphics Aperture Size
2-26 Satellite A20 Maintenance Manual (960-444)