Filter
Top Products
User's Manual
OPERATING BASICS
4-16
2. Plug one end of the cable into the LAN’s jack. Press gently until you hear the
latch click into place.
Figure 4-13 Connecting the LAN cable
3. Plug the other end of the cable into a LAN hub connector. Check with your
LAN administrator before connecting to a hub.
Disconnecting cable
To disconnect the LAN cable, follow the steps below.
1. Pinch the lever on the connector in the computer and pull out the connector.
2. Disconnect the cable from the LAN hub in the same manner. Check with your
LAN administrator before disconnecting from the hub.
Super Long Life scheme
The Super Long Life mode is a scheme of the TOSHIBA Power Saver utility.
It is designed to maximize battery operating time, therefore, when it is enabled
all LAN functions, both wired and wireless, are disabled.
The Super Long Life power saving scheme is not selected as a default.
NOTE: Wired and wireless LAN functions are disabled in the default
settings. To enable the settings, you must check the Control device
power management checkbox. Right-click the device name to change
the status. If the checkbox is not checked, you will not be able to change
the device status. Refer to TOSHIBA Power Saver utility help files for
details.
Using the internal modem