Filter
Top Products
User's Manual
9-16
TROUBLESHOOTING
Make sure your software is configured to recog-
nize the printer. Check your printer and software
documentation.
Printer error Check your printer documentation.
If problems persist, contact your dealer.
Pointing device
If you are using a PS/2 or serial mouse, also refer to Chapter 8, Optional Devices,
and to your mouse documentation.
AccuPoint II
Problem Procedure
On-screen pointer If a PS/2 or serial mouse is connected, check
does not respond to the HW Setup window. The Pointing Device
AccuPoint II operation option should be set to Simultaneous to use
both the AccuPoint II and an external PS/2
mouse.
If problems persist, contact your dealer.
PS/2 mouse
Problem Procedure
On-screen pointer Check that the PS/2 mouse cable’s 6-pin
does not respond to connector is firmly connected to the PS/2 mouse/
PS/2 mouse operation keyboard port.
You may have connected the mouse after
turning the computer on. Turn off the computer,
make sure the mouse is firmly connected and
turn the computer back on.