Filter
Top Products
8-14
User’s Manual
OPTIONAL DEVICES
Television
A television can be connected to the video out port on the computer. To connect a
television, follow the steps below.
1. Turn the computer off.
2. Use a video cable (not supplied) to connect the television to the video out port.
Figure 8-14 Connecting a television
3. Turn the television on.
4. Turn the computer on.
PS/2 mouse
Use the PS/2 keyboard/mouse port on the computer or optional Advanced Port
Replicator to connect a PS/2 mouse.
Make sure the mouse has a cable with a 6-pin connector for the PS/2 mouse port. If
the mouse’s cable is not compatible, see your dealer for an adaptor cable.
NOTES: 1. How the computer treats the connection to a PS/2 mouse
depends on the setting for Pointing Devices under
the HW Setup program. If Simultaneous is selected, you
can operate both the AccuPoint II and the PS/2 mouse. If
Auto-Selected is chosen, the AccuPoint II is disabled
when a PS/2 mouse is connected.
2. If you connect a PS/2 mouse to the computer while it is in
Standby mode, you will not be able to use the mouse when
you turn the computer on.
To connect a PS/2 mouse: