TP-Link C3200 Network Router User Manual


 
3Chapter 1 . Get to Know About Your Router
1. 2. Main Features
Complies with IEEE 802.11ac.
One 10/100/1000M Auto-Negotiation RJ45 Internet port, four 10/100/1000M Auto-Negotiation RJ45 Ethernet ports,
supporting Auto MDI/MDIX.
Provides a USB 3.0 port and a USB 2.0 port supporting file sharing and print server.
Provides WPA/WPA2, WPA-PSK/WPA2-PSK authentication, TKIP/AES encryption security.
Shares data and Internet access for users, supporting Dynamic IP/Static IP/PPPoE/PPTP/ L2TP Internet access.
Supports simultaneous 2.4GHz and 5GHz connections for 3200Mbps of total available bandwidth.
Supports Virtual Server, Special Application and DMZ host.
Supports UPnP, Dynamic DNS, Static Routing.
Provides Automatic-connection and Scheduled Connection on certain time to the Internet.
Built-in NAT and DHCP server supporting static IP address distributing.
Supports Parental Controls and Access Control.
Connects Internet on demand and disconnects from the Internet when idle for PPPoE.
Provides WEP encryption security and wireless LAN ACL (Access Control List).
Supports Flow Statistics.
Supports IPv6.
Supports firmware upgrade and Web management.
1. 3. Panel Layout
1. 3. 1. Front Panel
The router’s LEDs are located on the front panel (View from top to bottom). You can check the router’s working status by
following the LED Explanation table.
LED Explanation:
Name Status
Indication
Power
Flash
System initializing or firmware upgrading is in process. Do not disconnect or power off the
router.
On System initialization complete.
Off Power is off. Please ensure that the power adapter is connected correctly.