Filter
Top Products
45
Operation
Operation
Turning On the Scanner and Setting the Squelch
To turn the scanner on, rotate [VOL] clockwise. Turn the knob to a comfortable
sound level.
Rotate the squelch control [SQ] clockwise until you either hear a broadcast or
noise just stops. The control is now set for strong signals. If you desire to hear a
weaker signal, turn it counter clockwise from that point until you hear background
noise once more.
Startup Key Operation
You can setup a Startup Key Configuration so that the scanner can change the
lockout for each system or each site by pressing an assigned key while you power
up the scanner or an opening screen is displayed. Navigate to Set Startup Key
there are differences in the menu structure for Trunked and Conventional systems.
Conventional
[MENU] J4Program System JF
Select the conventional system JF
4 Edit Sys Option JF
4 Set Startup Key JFfor each system.
Trunked
[MENU] J4Program System JF
Select the trunked system JF
4 Edit Site JF
4 Select the site JF
4 Set Startup Key JF for each system or site.
Search Range
[MENU] J4Search for… JF
4 Edit Service JF
4 Select a Service RangeJF
4 Search with Scan JF
4 Set Startup KeyJF
OR