Filter
Top Products
70
[MENU]
J Program System JF
4 Select a conventional system JF
4 Edit Sys Option J F
4 Set Hold Time J F
Set how long the scanner will remain scanning on this system before moving to the
next system (up to 255 seconds). Note that the scanner will scan all unlocked
channels at least one time, regardless of the system hold time setting.
[MENU]
J Program System JF
4 Select a system JF
4 Edit Sys Option JF
4 ID Scan/Search JF
Sets whether the scanner only stops on talk groups you have programmed in (ID
Scan) or whether the scanner stops on any unlocked channel (ID Search).
[MENU]
J Program System JF
4 Select a system JF
4 Edit Sys Option JF
4 Set Delay Time JF
This setting controls how many seconds the scanner waits after a transmission
ends before resuming scanning. Enter a value from [1] to [5] or Off,
then press
F.
Notes:
• The default setting is 2 seconds for each system.
• This setting applies to all channels within the system.
[MENU]
J Program System JF
4 Select a Conventional system JF
4 Edit Sys Option JF
4 Set Data Skip JF
Setting the System Hold Time C
Setting ID Scan/ID Search MEL
Setting Channel Delay Time MELCS
Setting Data Skip C