Filter
Top Products
90
This setting controls whether the scanner treats the channel as a priority channel
while scanning. Select On or Off, then press
F.
On — when you turn on the Priority feature, the channel will be scanned every 2
seconds.
Off — the channel will not be treated with priority. The default setting is Off.
[MENU]
J Program System JF
4 Select a system JF
4 Edit Group JF
4 Select a channel group JF
4 Edit Channel JF
4 Select the channel JF
4 Set Alert JF
Off — the scanner does not alert you when the channel becomes active.
Alert 1 - 9 — the scanner sounds an alert beep to notify you that the channel
has become active. You can choose any of 9 different beep types. Once you
choose an alert tone, then:
4J Set Level JF
Auto — the scanner automatically sets the channel alert beep to match the
master volume level.
Level 1 - 15 — the scanner adjusts the volume of the beep to the level you
select.
Set Record
[MENU] J Program System JF
4 Select a system JF
4 Edit Group JF
4 Select a channel group JF
4 Edit Channel JF
4 Select a channel JF
4 Set Record JF
On — the scanner outputs the signal.
Off — the scanner does not output any audio.
Setting Channel Alert MECL