Filter
Top Products
84
Follow these steps to enter/edit the group name.
1. The current name displays with the first character of the name highlighted.
2. Rotate the Scroll Control to select a new first letter. Press [6] to move one
character to the right. Repeat the Scroll Control action to change the
character. To move one character to the left, press [4].
3. Repeat Step 2 until you have entered the system name. Then press
F to
accept the setting.
Notes:
• Each group name can be up to 16 characters. Abbreviate as necessary to fit.
• The group and system (for conventional, SCAT, and LTR systems) or site (for
Motorola and EDACS systems) name alternate in the top line of the display
when the scanner stops on a channel.
•Press [.No] twice to delete the current character.
•Press [.No] three times to clear the entire alpha tag.
To assign a Quick Key to a Group, follow these steps.
[MENU]
J Program System JF
4 Select a trunked system JF
4 Edit Group JF
4 Select the Group JF
4 Set Quick Key JF
Select a desired quick key for this Group.
Once you create a channel group, store channels in that group. See “Programming
Channels” on Page 85 for specific channel options.
[MENU]
J Program System JF
4 Select an existing system JF
4 Edit Group JF
4 Select an existing group JF
4 Set Lockout JF
Setting the Group Quick Key
Editing Channels MECL
Locking Out Channel Groups MECL