Uniden SC230 Scanner User Manual


 
42
Other Settings
Using the PC Control and
Cloning Options
Use the included connection cable to connect your scanner
to another SC230 scanner or your personal computer.
Xfer Information E
PC Control Lets you set the baud rate your scanner
uses to communicate with a personal computer. See
“Connecting Your Scanner to a Personal Computer”.
WIRED Clone Lets you set your scanner as a master
or a slave, letting you transfer programming to or from
another SC230 scanner. See “Cloning the Scanner”
on Page 43.
On
_
Air Clone Lets you clone all programmed data
over the air to or from another SC230 scanner.
Connecting Your Scanner to a
Personal Computer
To connect your scanner to a
personal computer, you must
first set the scanner’s baud rate
(the rate at which data is
transferred between the
scanner and the computer, in
bits per second (bps)).
Hint: If you have trouble
transferring data between your
scanner and your
computer, try setting the baud
rate to a slower setting.
Xfer Information E
PC Control E  
Off The baud rate is not set.
9600 bps The baud rate is set to 9600 bps.
19200 bps The baud rate is set to 19,200 bps.
38400 bps The baud rate is set to 38,400 bps.
57600 bps The baud rate is set to 57,600 bps.
Menu
Menu