Uniden SC230 Scanner User Manual


 
48
Programming Radio Systems
8. Set the attenuator (turn
it on to eliminate
interference from other
sources), then press E
9. Set the channel priority
(turn it on if you want
the scanner to interrupt
operation every few
seconds to check for
transmissions by this
driver), then press E
10. Set alert (turn it on if
you want the scanner
to sound a special alert
when this car
transmits), then press E
11. If you have another
frequency to enter for
this driver, ) press E
then repeat from Step
5. Otherwise, press No
12. To enter another car in
this race, press E then
repeat from Step 3.
Otherwise, press No
13. When you finish, press
Scan to begin
scanning the race
Set Attenuator
Off
Set Priority
Off
Set Alert
Off
Another Freq for
This driver?
Another Car For
This Race?
Complete
Press SCAN key
SC230 Paper OM.fm Page 48 Wednesday, October 6, 2004 10:51 AM