Filter
Top Products
79
Search and Close Call Options
Off The scanner resumes immediately when the
transmission ends.
1-5 sec The scanner waits the set amount of time after
the transmission ends before resuming.
Note: The default setting is 2 seconds.
Setting the Search Frequency Step
Srch/CloCall Opt E
Set Step E
This setting selects the frequency step used for setting
the channels. Select your setting, then press E.
Auto The step is based on the band (see the table at the
front of the manual)
5.0 kHz, 6.25 kHz, 7.5 kHz, 10.0 kHz, 12.5 kHz, 15.0 kHz,
20.0 kHz, 25.0 kHz, 50.0 kHz, 100.0 kHz The scanner
uses the selected step.
Note: The scanner defaults to Auto.
Menu
SC230 Paper OM.fm Page 79 Wednesday, October 6, 2004 10:51 AM