Uniden SC230 Scanner User Manual


 
76
Search and Close Call Options
Note: This feature does not operate when the scanner is
in AM modulation mode.
Screening Out Paging Systems
  Srch/CloCall Opt E
Pager Screen E
This setting determines whether the scanner
automatically ignores transmissions found during
searching or Close Call operation that are on common
paging system frequencies.
On The scanner skips known paging system frequencies.
Off The scanner stops on any detected transmission,
including paging systems.
Notes:
The default setting for this feature is On.
The frequencies include paging systems and also the
NOAA weather frequencies.
Even with the feature on, you might hear some
paging systems. Some frequencies are shared
between business radio systems and paging
systems. If the scanner stops on a paging system
even with this feature turned on, manually lock it out by
pressing L/O.
Finding Repeater Output Frequencies
  Srch/CloCall Opt E
Repeater Find E
This feature sets whether the scanner tries to tune to a
repeater output frequency during Close Call operation
when it detects a transmission on a repeater input
frequency. Since you can normally only hear one side of a
conversation when you listen to an input frequency
transmission, turning this feature on can let you hear both
sides of the conversation.
Menu
Menu
SC230 Paper OM.fm Page 76 Wednesday, October 6, 2004 10:51 AM