Uniden SC230 Scanner User Manual


 
52
Programming Radio Systems
Setting Lockout On A Car
Program SysteM E
Select the system E
Edit Car
E
Select the car
E
Set LockoutE
This setting determines whether the scanner will scan this
car when it is enabled. Select your setting, then press E.
Lockout - the car is not scanned.
Unlocked - the car is scanned.
Note: The default setting is Unlocked.
Programming Conventional Systems
Program SysteM E
New System E   Conventional
E Confirm? E
The scanner creates an empty conventional system, with
a default name of System nnn C. nnn increments
as you add new systems. C indicates that this is a
conventional system.
Refer to the appropriate section to set system-wide options:
See “Editing the System Name” on Page 55
See “Editing the System Quick Key (Conventional
Systems Only)” on Page 55
See “Setting System Lockout” on Page 56
See “Setting the System Hold Time” on Page 56
See “Setting the Channel Delay Time” on Page 57
See “Setting Data Skip” on Page 57
See “Deleting Systems” on Page 58
See “Copying Systems” on Page 58
See “Entering/Editing Conventional Channel Groups”
on Page 53
Menu
Menu
SC230 Paper OM.fm Page 52 Wednesday, October 6, 2004 10:51 AM