Uniden SC230 Scanner User Manual


 
49
Programming Radio Systems
Manually Programming Racing
Systems
Program SysteM E
New System E Racing E
Confirm?
E
The scanner creates an empty conventional system, with a
default name of System nnn R. nnn increments as you
add new systems. R indicates that this is a racing system.
Refer to the appropriate section to set system-wide options:
See “Editing the System Name” on Page 55
See “Setting System Lockout” on Page 56
See “Setting the System Hold Time” on Page 56
See “Setting the Channel Delay Time” on Page 57
See “Setting Data Skip” on Page 57
See “Deleting Systems” on Page 58
See “Copying Systems” on Page 58
Editing the Car
Program SysteM E
Select the system E
Edit Car
E
Select the car
E
Follow these steps to enter the car options.
1. Press 0-9 to enter the car’s number, then press E.
2. Rotate the scroll control to select one of the following
options. Then refer to the appropriate section to set
or change a car setting.
See “Entering/Editing a Car Number” on Page 50.
See “Editing a Driver” on Page 50.
See “Setting a Car’s Quick Key” on Page 51.
See “Editing a Car’s Channel” on Page 51.
See “Deleting a Car” on Page 51.
See “Setting Lockout On A Car” on Page 52.
Menu
Menu
SC230 Paper OM.fm Page 49 Wednesday, October 6, 2004 10:51 AM