47
Programming Radio Systems
Quickly Programming Racing
Systems
You can use the menu system to program a racing
system (see “Manually Programming Racing Systems” on
Page 49). Or you can follow the onscreen prompts as
described in this section to quickly program your scanner.
These prompts are designed to help you quickly enter a
new race from a frequency list purchased at the track (if
the system is not already preprogrammed into your
scanner). When you complete Steps 5 and 6, almost all
cars will use the default settings for the other steps.
1. While scanning, press
0. Then rotate the scroll
control to select New
Race, then press E.
2. Enter the name of the
race, then press E.
3. Enter the first car
number (up to 3 digits),
then press E.
4. Enter the first driver
name (up to 12
characters), then press
E.
5. Enter the driver’s
frequency, then press
E.
6. Set the CTCSS/DCS
code, then press E
7. Set the modulation
type (Auto is almost
always the correct
choice), then press E
Select Race
New Race
Name the Race
_
SYS
GRP
Enter Car No
_
SYS
GRP
Enter Driver
_
SYS
GRP
Enter Frequency
_
SYS
GRP
Set CTCSS/DCS
Off
Set Modulation
Auto
SC230 Paper OM.fm Page 47 Wednesday, October 6, 2004 10:51 AM