Filter
Top Products
68
Searching and Storing
• If the service you select uses channels (such as CB
radio or marine), the scanner displays the service
channel number.
Quick Search
Quick Search lets you search from the currently-tuned
frequency.
Press and Scan/Srch to start quick search. QUICK
Search? appears. Quick Search Hold appears if you
press Hold. Press E to start quick search or No to go to
the search menu.
CTCSS/DCS Search
CTCSS/DCS Search lets you search for CTCSS or DCS
tones when it finds an active frequency in search and
Close Call modes. You can identify up to 50 CTCSS
tones and 104 DCS codes.
Turning this option on lets the scanner search for CTCSS/
DCS tones. If the scanner detects the tone, it displays the
tone’s frequency and DCS code.
1. Press then turn the scroll control until
SRCH/CLOCALL OPT appears. Then press E.
One of the search feature options appear.
2. Turn the scroll control until CTCSS/DCS SEARCH
appears, then press E to select it.
3. Turn the scroll control until ON appears to turn on
CTCSS/DCS search or until OFF appears to turn it off,
then press E.
Custom Search
Custom Search lets you program and search 10 custom
search ranges. You can search any of these ranges
simultaneously and select each custom search range you
set. During custom search, the scanner searches starting
with the lowest frequency in the search range you select
to the highest frequency in the range.
Func
Menu
SC230 Paper OM.fm Page 68 Wednesday, October 6, 2004 10:51 AM