Filter
Top Products
58
Setting the Time Format
[MENU] Settings
Set GPS Format
Set Time Format
This setting controls the format used for displaying the time on the GPS data
screens.
12H — the scanner displays time in 12-hour format using am for mornings and pm
for evening times.
24H — the scanner displays time in 24-hour format using 0 for midnight and 23 for
11 pm.
Setting the Time Zone
[MENU] Settings
Set GPS Format
Set Time Zone
This setting controls the format used for adjusting Universal time to local time. Set
your local time’s offset
from UTC (formally known as GMT).
Setting the Distance Units
[MENU] Settings
Set GPS Format
Set Pos Format
This setting controls the distance units shown in the GPS data screens and used
for entering distance for POI’s
mile — The scanner uses miles.
km — The scanner uses kilometers.
Setting the Serial Port Speed
[MENU] Settings
Set Serial Port
Set Baud Rate
Set Front Port or Set Rear Port
Use this setting to control the data rate used for the front and back panel serial
ports. You typically set the front port to match the speed used to communicate with
UB335ZH.book Page 58 Friday, March 17, 2006 4:35 PM