Filter
Top Products
97
Searching and Storing
Set Attenuator
to select to choose an attenuation for all frequencies in the range.
On — the frequencies are attenuated.
Off — the frequencies are not attenuated.
Set Record
to select to enable a live audio output from REC to an audio recording device.
On — the scanner outputs the signal.
Off — the scanner does not output any audio.
Assigning a Search Range to a Search Key
You can assign any of the Service or Custom Searches to the six Search keys for
quick access to your favorite searches.
[MENU]
Search for ...
Set Search Key
Select the key to assign
Select a search range
[MENU]
Search for ...
Now, to access that search, hold on any channel, then press and the number
key [1] to [6] corresponding to the search range.
The default settings are:
SRCH 1: Custom 1
SRCH 2: Public Safety
SRCH 3: Railroad
SRCH 4: FRS/GMRS
SRCH 5: TV Broadcast
SRCH 6: FM Broadcast
Saving a Found Channel (Quick Save)
Press [EYES] to save a channel’s frequency if you hold on a channel or detect a
channel, instead of using Direct Entry at another time. The alpha data is also
stored. If a GPS unit is attached, the longitude and latitude data is saved and also
UB335ZH.book Page 97 Friday, March 17, 2006 4:35 PM