Uniden BCD996T Scanner User Manual


 
69
Programming Your Scanner
After selecting this option, select any number from 0-99 to assign the system to a
quick key or press [.No] to assign the system to no quick key, then press .
Notes:
Access single-digit system/site Quick Keys by pressing the single digit on the
keypad during scanning. Access two-digit system Quick Keys by pressing
[.No] then both digits.
You can assign as many systems to the same quick key as you want.
To be scanned, a system’s Quick Key must be activated and the system must
be unlocked.
[MENU]
Program System
Select a conventional system
Edit Sys Option
Set Startup Key
Select a startup key from 0-9 or select “.” for no startup key.
Notes:
To unlock the system at startup, press and hold the selected startup key while
you apply power. If you do not press the startup key at the time you turn on
power, you can still act while the opening screens are displayed.
The system Quick Key is also enabled.
If you press a different key at startup, the system is locked out.
If you do not assign the system a startup key, the system is not affected by any
key press during startup.
[MENU]
Program System
Select a conventional system
Edit Sys Option
Set Lockout
Unlocked — The system is scanned when its quick key is enabled.
Temporary L/O — The system is not scanned, even if its quick key is enabled.
Cycling power will remove the lockout.
Lockout — The system is not scanned, even if its quick key is enabled. You must
manually unlock the system.
Setting the Startup Key C
Setting the System Lockout C
UB335ZH.book Page 69 Friday, March 17, 2006 4:35 PM