Filter
Top Products
84
Follow these steps to enter/edit the group name.
1. The current name displays with the first character of the name highlighted.
2. Rotate the Scroll Control to select a new first letter. Press [6] to move one
character to the right. Repeat the Scroll Control action to change the
character. To move one character to the left, press [4].
3. Repeat Step 2 until you have entered the system name. Then press to
accept the setting.
Notes:
• Each group name can be up to 16 characters. Abbreviate as necessary to fit.
• The group and system (for conventional, SCAT, and LTR systems) or site (for
Motorola and EDACS systems) name alternate in the top line of the display
when the scanner stops on a channel.
•Press [.No] twice to delete the current character.
•Press [.No] three times to clear the entire alpha tag.
Once you create a channel group, store channels in that group. See “Programming
Channels” on Page 85 for specific channel options.
[MENU]
Program System
Select an existing system
Edit Group
Select an existing group
Set Lockout
This setting determines whether the scanner will scan this group of channels.
Select your setting, then press .
Lockout — the group is not scanned.
Temporary L/O — the group is not scanned for this session. The L/O is
cancelled when you cycle power.
Unlocked — the group is scanned. The default setting is Unlocked.
Editing Channels MECL
Locking Out Channel Groups MECL
UB335ZH.book Page 84 Friday, March 17, 2006 4:35 PM