Uniden BCD996T Scanner User Manual


 
87
Programming Your Scanner
For each channel, you can select the audio type that the channel receives.
[MENU]
Program System
Select the system
Edit Group
Select the channel group
Edit Channel
Select an existing channel
Set Audio Type
Select from All, Digital Only, Analog Only
All — The scanner automatically determines whether the audio is analog or
digital.
Digital Only — The scanner only remains on the channel if it is carrying APCO
25 digital audio
Analog Only — The scanner only remains on the channel if it is carrying analog
audio.
If you are programming a conventional system and select Analog Only, the
scanner prompts you to select the CTCSS/DCS tone setting. See the next section.
To program a channel with a CTCSS or DCS setting, your conventional system
audio must be set to Analog Only first.
[MENU]
Program System
Select the system
Edit Group
Select the channel group
Edit Channel
Select the channel
Set Audio Type
Analog Only
At this point you can scroll to CTCSS or DCS and select the subaudible frequency
in the CTCSS range or the DCS code.
CTCSS or DCS
Setting the Audio Type MECL
Selecting CTCSS/DCS Tones C
UB335ZH.book Page 87 Friday, March 17, 2006 4:35 PM