Filter
Top Products
70
[MENU]
Program System
Select a conventional system
Edit Sys Option
Set Hold Time
Set how long the scanner will remain scanning on this system before moving to the
next system (up to 255 seconds). Note that the scanner will scan all unlocked
channels at least one time, regardless of the system hold time setting.
[MENU]
Program System
Select a system
Edit Sys Option
ID Scan/Search
Sets whether the scanner only stops on talk groups you have programmed in (ID
Scan) or whether the scanner stops on any unlocked channel (ID Search).
[MENU]
Program System
Select a system
Edit Sys Option
Set Delay Time
This setting controls how many seconds the scanner waits after a transmission
ends before resuming scanning. Enter a value from [1] to [5] or Off, then
press .
Notes:
• The default setting is 2 seconds for each system.
• This setting applies to all channels within the system.
[MENU]
Program System
Select a Conventional system
Edit Sys Option
Set Data Skip
Setting the System Hold Time C
Setting ID Scan/ID Search MEL
Setting Channel Delay Time MELCS
Setting Data Skip C
UB335ZH.book Page 70 Friday, March 17, 2006 4:35 PM