Filter
Top Products
89
Programming Your Scanner
WFM (Broadcast) — the scanner uses FM Broadcast for the channel.
This setting controls the modulation method used for the channel. In most cases, if
you leave this set to Auto, the scanner automatically selects the correct
modulation type for the channel you are programming.
[MENU]
Program System
Select a conventional system
Edit Group (existing site)
Select a channel group
Edit Channel
Select a channel
Set Attenuator
This setting controls whether the scanner attenuates signals on this channel.
Select your setting, then press .
On — the channel is attenuated by about 20 dB.
Off — the channel is not attenuated. The default setting is Off.
You can also toggle this setting by holding on the channel and pressing then [7]
within 2 seconds.
[MENU]
Program System
Select a conventional system
Edit Group
Select a channel group
Edit Channel
Select the channel
Set Priority
This setting controls whether the scanner treats the channel as a priority channel
while scanning. Select On or Off, then press .
On — when you turn on the Priority feature, the channel will be scanned every 2
seconds.
Off — the channel will not be treated with priority. The default setting is Off.
Setting Channel Attenuation C
Setting Channel Priority C
UB335ZH.book Page 89 Friday, March 17, 2006 4:35 PM