Filter
Top Products
COURIER HIGH SPEED MODEMS
Summaries and Tables B-23
Register Default Function
Setting S28 to zero eliminates the extra
tones, resulting in a faster connect time if,
for example, the modem is set to use V.21
modulation (300 bps) or V.23 modulation
(1200 bps).
S29 20 Sets the duration, in tenths of a second, of
the answer tones sent during V.21 hand-
shaking. Default = 20 (2 seconds). This
gives V.21 modems additional time to
connect in V.21 mode before timing out.
S30−S31 0 Reserved.
S32 9 Sets the function for the voice/data
switch. This is not a bit-mapped register.
Select the value for the desired function,
for example, ATS32=6.
ValueResult
0 Disabled
1 Voice/data, Originate mode.
See value 9.
2 Voice/data, Answer mode
3 Redial last number
4 Dial number stored at
position 0
5 Auto Answer on/off toggle
6 Reset the modem
7 Initiate Remote Digital
Loopback
8 Busy out phone line toggle
9 Default if a command string is
stored with the &ZC=string
command. When voice/data
switch is pushed and &ZC has
been enabled, modem executes
stored command string.
Otherwise acts like value 1,
Originate mode
NOTE: Only use the voice/data switch
when the modem is in Command mode .