Filter
Top Products
COURIER HIGH SPEED MODEMS
Data Mode Operations 4-3
• Configuration:
Echo/Speaker
Result Codes
Modulation
Error Control/Data Compression
Data Rates
RS-232 Signal Operations
Flow Control
• S-Registers
• Inquiry and Help
• Testing
• International Calls
• Miscellaneous Commands
For an alphabetical listing of commands, check the first page of
the index.
NOTE: The defaults listed are based on the modem's shipping
configuration: load from nonvolatile random access memory
(NVRAM), DIP switch 10 OFF, which is the same as the &F1
configuration template). For a complete listing of default
configuration templates, see Appendix B.
BASIC COMMANDS
AT Attention command prefix. Use AT alone to test for the OK
result code. AT must prefix all commands except A/, A> and
+++.
Any Terminate the current dialing operation resulting from an
key issued Dial command; terminate Repeat mode (> or A>).